CM i4 Container Mixer

Discover the Flexible Container Mixer i4—efficient mixing and easy cleaning for maximum flexibility.

• greater flexibility in production
• lower investment volume
• higher efficiency of the mixers due to better capacity utilization
• Flexible batch sizes and recipe changes
• Seals are attached to the mixing container
• Homogenize
• Dispersing
• short mixing times with excellent homogenization of the material
• Moderate inlet temperature due to low circumferential velocities (4–15 m/s)
• Minimal product adhesion due to innovative geometry and the large distance between the mixing head and the container
• The mold and mixing head can be cleaned with the mold in place
• Suction device
• Temperature measurement of the mixed material
• Aeration and feeding during the mixing process
• Dosing of liquids and gases during the mixing process
• Data recording and evaluation
• Remote maintenance
• Compatibility with existing plants and containers
• Advanced stainless steel design of the container mixer
• Wear protection for the tools
• Option to add ingredients in the mixing position
• Special coating
• Coatings
• AGV (Automatic Guided Vehicle) compatibility
• ATEX/NEC design
• 360° cloud monitoring (MIXACO Control Center)

The innovative flat mixing head and optimized machine components significantly reduce the amount of cleaning required.

Proven technology and forward-looking innovations result in an advanced industrial mixer with longer service life and lower maintenance requirements.

The innovative flat mixing head and optimized machine components significantly reduce the effort required for cleaning. Proven technology and forward-looking innovations result in an advanced industrial mixer with longer service life and lower maintenance requirements.

The flat mixing head has a smaller surface area than a conventional mixing head and can therefore be cleaned more quickly and easily. The large distance between the mixing tool and the mixing head allows for cleaning while the unit is installed. This enables extremely fast cleaning cycles and recipe changes. The new tool design ensures optimal mixing flow formation (vortex) with moderate heat input.

As the inventor of the container mixer, we at MIXACO are committed to innovation in industrial mixing technology. With the new CM i4 container mixer, we are once again taking a major step toward the future of industrial dry mixing.

The CM i4 container mixer is a further development of the proven container mixer concept. However, the CM i4 has new features that make it even more appealing.

Unlike the Multitool container mixer, it features a completely new type of flat mixing head that allows for quick cleaning. The mixing tools do not need to be removed for cleaning. The container mixer’s design, which does not include a base plate, also significantly reduces the effort required for cleaning.

The CM i4 is therefore particularly well-suited for applications in which different recipes require frequent cleaning of the mixer. The resulting increase in efficiency is an important factor in reducing production costs.

The CM i4 can be used across multiple floors in your production facility thanks to its mobile containers and accessories, just like the Multitool container mixer and the Vortex container mixer. Using the appropriate connections, the mixing container can be emptied dust-free directly into extruders, kneaders, secondary vessels, and weighing and bagging devices in the next process step.

With its revolutionary mixing system, the MIXACO CM i4 container mixer offers versatile application possibilities for the production of a wide range of products. Another option is the use of multiple container sizes with a single mixer.

This mixer embodies the features of Industry 4.0 and the IoT (Internet of Things) as applied to the mixing industry. Its distinguishing features include excellent mixing flexibility, high quality, and minimal cleaning effort.

The control system for the CM i4 container mixer is based on a Siemens S7 PLC and meets today’s requirements for safety, efficiency, and cost-effectiveness. The development and programming of the control system from a single source ensures optimal integration of the mixer components. Alternatively, it is also possible to use Allen-Bradley components (including the PanelView operator terminal).

The control can also be designed in accordance with UL/NEMA standards. In addition, the control can be equipped with an interface for data exchange with a higher-level control system.

Up to 99 mixing programs, each with ten steps, can be created in tabular form using the TP700 touchscreen control panel. Data is collected and the measured values are stored.

Control system compliant with UL/NEMA standards, featuring an Allen-Bradley PLC and a PanelView control panel.

The CM i4 container mixer is used in a wide variety of applications, such as powder coatings, masterbatches, and the preparation of toner, color concentrates, or additives.

With its revolutionary mixing system, the MIXACO CM i4 container mixer offers versatile application possibilities for the manufacture of numerous products.

Another option is to use multiple container sizes with a single mixer to accommodate different batch sizes using just one machine.

Our CM i4 industrial mixer offers all the functions and mixing processes of our proven container mixer design. Temperature-controlled mixing is also possible with the CM i4.

The innovative mixing system of the MIXACO CM i4 container mixer enables the processing of countless raw materials from a wide range of industries:

The MIXACO i4 mixing tool was specially developed for use in a mixer with a flat mixing head. The innovative design of the i4 tool enables effective mixing flow formation, even at moderate peripheral speeds. These range from 4 to 15 m/s, depending on the application. Excellent homogenization and color application are guaranteed.

Because of the large distance to the mixing head base, the mold can be cleaned while it is installed. The large distance to the mixing head and to the container, as well as the innovative geometry of the i4 mold, minimize material buildup, which also significantly simplifies cleaning.

The MIXACO CM i4 container mixer can be expanded in many ways. Additional customizations can be developed in collaboration with our engineers to meet your specific needs. We would be happy to advise you on the options available:

Dust-free automatic, semi-automatic, or manual loading of containers.

Dust-free discharge of the mixed material into subsequent processing steps.

Easy and fast transport—battery-powered, with a charger included.

Test our mixers at our test center—using your own raw materials, of course.

Have your mixing process reviewed by our mixing professionals—free of charge and with no obligation.

At our test centers, we can optimize all parameters for your compound.