The Vortex Loading Spout (also known as loading chutes) can be used in tandem with accessories specifically designed for loading efficiency in barge loading applications.<\/p>\n
\u2022 For spouts with shorter length, a stacking, cone-in-cone design can be used in tandem with a Vortex In-Line Filtration System at the material feed inlet. The In-Line Filtration System is designed to collect fugitive dusts by means of air withdrawal. An outer sleeve is intended to contain fugitive dusts. Fugitive dusts are captured in pleated polyester filter cartridges. Throughout the loading process, automatic reverse pulse jets inject compressed air to purge the captured dusts back into the load.
\n\u2022 Material Level-Sensing Device, to be used in tandem with an Auto-Raise System. At the outlet scavenger, a Material Level-Sensing Device automatically indicates when the material pile has grown to a specified level. When used in tandem with an Auto-Raise System, this triggers an automatic, incremental retraction of the spout. This automates the loading process to prevent material build-up in the spout, eliminate the need for visual monitoring, and avoid vessel overfilling.
\n\u2022 A Dust Control Skirt encompasses the peak of the material pile to address dusting to atmosphere.<\/p>\n
Open and\/or enclosed loading applications<\/p>\n
Gravity drop in the presence of slight negative pressure<\/p>\n
250\u00b0F | 120\u00b0C for standard spout, with modifications that allow up to 400\u00b0F | 205\u00b0C<\/p>\n
Overall height (retracted) will vary, based on models and application. Designed to be low profile, paying mind to clearance available overhead and extended travel required to reach the necessary vessel(s).<\/p>\n
Standard options are available. Some Vortex Loading Spouts may require additional design considerations to ensure their success in a given application.<\/p>\n
For spouts with shorter length, a stacking, cone-in-cone design can be used in tandem with a Vortex In-Line Filtration System at the material feed inlet. The In-Line Filtration System is designed to collect fugitive dusts by means of air withdrawal. An outer sleeve is intended to contain fugitive dusts. Fugitive dusts are captured in pleated polyester filter cartridges. Throughout the loading process, automatic reverse pulse jets inject compressed air to purge the captured dusts back into the load.<\/p>\n
For spouts with greater length, a telescoping, tube-in-tube design provides greater stability than the standard, stacking, cone-in-cone spout design. A telescoping, tube-in-tube spout design can be used in tandem with a Vortex Discharge Filtration System at the point of discharge. The Discharge Filtration System is designed to collect fugitive dusts by means of high volume exhaust blowers. Fugitive dusts are captured in pleated polyester filter cartridges. Throughout the loading process, automatic reverse pulse jets inject compressed air to purge the captured dusts back into the load. The purpose of a Discharge Filtration System is to better collect fugitive dusts originating near the point of discharge.<\/p>\n
Material Level-Sensing Device, to be used in tandem with an Auto-Raise System. At the outlet scavenger, a Material Level-Sensing Device automatically indicates when the material pile has grown to a specified level. When used in tandem with an Auto-Raise System, this triggers an automatic, incremental retraction of the spout. This automates the loading process to prevent material build-up in the spout, eliminate the need for visual monitoring, and avoid vessel overfilling.<\/p>\n
A Dust Control Skirt encompasses the peak of the material pile to address dusting to atmosphere.<\/p>","protected":false},"excerpt":{"rendered":"
The Vortex Loading Spout (also known as loading chutes) can be used in tandem with accessories specifically designed for loading efficiency in barge loading applications.<\/p>","protected":false},"featured_media":2691,"comment_status":"open","ping_status":"closed","template":"","meta":{"inline_featured_image":false},"sycsa_brand":[25],"product_brand":[73],"product_cat":[72,23],"product_tag":[],"class_list":["post-2242","product","type-product","status-publish","has-post-thumbnail","sycsa_brand-vortex","product_brand-vortex","product_cat-compuertas-y-desviadores-para-solidos-secos","product_cat-valvulas-y-compuertas","first","instock","shipping-taxable","purchasable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/commerss.com\/en\/wp-json\/wp\/v2\/product\/2242","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/commerss.com\/en\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/commerss.com\/en\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/commerss.com\/en\/wp-json\/wp\/v2\/comments?post=2242"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/commerss.com\/en\/wp-json\/wp\/v2\/media\/2691"}],"wp:attachment":[{"href":"https:\/\/commerss.com\/en\/wp-json\/wp\/v2\/media?parent=2242"}],"wp:term":[{"taxonomy":"sycsa_brand","embeddable":true,"href":"https:\/\/commerss.com\/en\/wp-json\/wp\/v2\/sycsa_brand?post=2242"},{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/commerss.com\/en\/wp-json\/wp\/v2\/product_brand?post=2242"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/commerss.com\/en\/wp-json\/wp\/v2\/product_cat?post=2242"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/commerss.com\/en\/wp-json\/wp\/v2\/product_tag?post=2242"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}